5 Tips to Green your Shower and Bath
After washing machines and dishwashers, showers are the third-largest water consumers in the home. With a few simple upgrades and some minor lifestyle adjustments, water consumption can be significantly reduced.
✔ Opt for a shower instead of a bath – The average bath requires between 30 and 50 gallons of water. The average water usage depends on how long you stay in the shower and how much water comes out of your showerhead. If you have a low- flow showerhead installed and your shower is less than 10 minutes, you’ll be saving water.
✔ Install a low-flow showerhead – Many different varieties of low- flow showerheads are available on the market. These varieties can be found at different price-points and use different methods to restrict water. Below is a description of the different options available.
- Air-rating – Aerating showerheads mix air into the water stream, maintaining steady pressure so the spray is even and full.
- Pulsing – Non-aerating showerheads add a pulse to the water stream to keep the temperature even.
A typical 5-minute shower can use up to 40 gallons of water. Installing a low-flow showerhead can save more than 12 gallons per shower. Ultra-low-flow heads conserve, even more, using only .8 to 1.5 gpm, reducing the average five-minute shower’s water usage from 40 to 7.5 gallons. Prices for low-flow showerheads range from around $10 up to $1000 (for high-end rainwater panels). Most people will be able to find a showerhead that matches their bathroom decor for well under $50.
✔ Lower the temperature – Heating water is a significant expense for most households. By reducing the temperatures (either at the tap or by lowering your hot water heater settings), you will save energy. If you do not know what temperature your hot water is currently set, try to find this out. Most hot water heaters are set at F 140 at the factory. Try reducing this temperature by 10 degrees and see if this provides enough hot water for your needs. If it does, reduce it by an additional 10 degrees. Most green publications suggest a set of F 120.
✔ Make your environment nontoxic and full of organic materials – Many shower environments are full of toxins and VOC releasing materials. By making the changes below, you can remove these from your bath.
- Use natural fiber curtains and towels – Vinyl shower curtains are inexpensive and provide an effective water barrier, but they also grow mold quickly and release toxins into the environment both during use and their end of life. Opt for a natural fiber shower curtains and towels instead.
- Choose natural bathroom cleaners – Conventional household cleaners often contain toxic chemical cleaning agents. Opt for eco-friendly cleaning products.
- Use organic, nontoxic personal hygiene products – Soaps, shampoos and shower gels come in direct contact with your skin. By opting for organic, nontoxic products, you will reduce your exposure to toxic chemicals and lessen your chances of skin irritation.
✔ Time yourself – One of the best ways to reduce your water consumption is to reduce your time. A good way to begin is to time your typical shower. The next time you shower, set the timer for half that time and see if you are able to finish before the timer goes off. Alternatively, consider buying a shower timer. A shower timer will shut off the flow of water after a predetermined amount of time. While shower timers may be an effective tool to reduce shower times, we would suggest a few timed runs to make sure you don’t get caught fully lathered.
